#Gibson minitune manual pdf#
#Gibson minitune manual manual#

#Gibson minitune manual manual#

I selected a drill bit which was the same size or with a smaller diameter then the shaft of the screws. YOU CAN TURN MANUAL LY ON THE KEY OR BY STRING UP MODE (PAGE 23) PULL TIGHT ON THE STRING TO GET PRETENSION AND BEND IT ONE HALF TURN AROUND THE BOTTOM SIDE OF THE STRING SHAFT. I then marked the locating for the pilot holes (I actually ended up drilling with the machine heads still on) I just pushed the pegs all the way through, loosely fitting the nuts and washers at the front, and lined up the machine heads until I was happy they were straight. This is what you're left with once it's been removedįirst step was to provisionally fit all the machine heads for alignment So once I got to the last peg, I had to hold the Min-ETune unit to prevent it from falling off This is the only thing holding on the machine heads and the Min-ETune unit.

I then carefully unfastened the nuts on the tuner pegs at the front of the headstock Strings off, along with the bridge and saddles They will screw all the way off so you have to be careful not to lose them The nuts which clamp the strings in place have to be unscrewed a little to remove the strings I prepared by unwinding the strings as per the user manual for the Min-ETune. (The Min-ETune tuners do not use screws). Min-ETune MANUAL v 1. The only drilling required is for the pilot holes for the screws of the new machine heads. The headstock holes for the pegs of the machine heads are a standard Gibson size (roughly 10mm diameter) and will take standard Gibson machine heads. It was a simple process which required no reaming.

#Gibson minitune manual pdf#

If the system works it's great, but if one of the tuners gets blocked, then it's game over, you won't be able to play your favorite instrument.Here are a few photos showing how I replaced the Min-ETune unit and machine heads on my 2014 SG Standard. Gibson MinETune Manual-2012 v1 - Free download as PDF File (.pdf), Text File (.txt) or view presentation slides online. If I had to choose today, with the little experience I've had with this tool, I would go for classic and manual tuners, given their fragility and price! But finding the tuners for this system is a job in itself and I'm still not done! So, replacing the tuner in question poses not a problem, because they can all be taken off independently. The headstock-mounted gears are the next generation of the company's 'Robot' technology, and appear on the new Tribute Les Paul and SG models. I play open tunings a lot, so I use the tuners quite a bit, but this product is made for that, isn't it? Gibson's Min-ETune system is the latest take on mechanical self tuning for electric and acoustic guitars. I haven't had the time to change strings. But that's not all, twice I've had a tuner blocked while simply tuning. Couple these drastic changes with a whopping twenty-nine per cent price increase. And now, the G-Force is standard fare on almost all Gibson guitars whether we want it or not. The second point is more important: The tuners are very fragile, so you need be careful when you change strings. The G-Force is an updated and improved version of the Robot Mini-Tune system Gibson began using a few years ago on select models. I didn't know this product, but I found it really useful at first.įirst point: In terms of tuning, it's better if you tune two times, because the first time it's not that precise, even if it's not bad. I got it as a family present this last July. It came installed from factory on my Gibson Sg Standard.